Every product we recommend is carefully researched, fact checked and tested where possible. If you buy from a link, we may earn a small commission. Learn more.

best-circular-saw-uk

The UK's bestCircular Saws2022 Review

What To Look For in a Circular Saw

The best circular saw should be powerful enough to rip and crosscut through a variety of materials in seconds with minimal effort and pinpoint accuracy. Circular saws can be cordless (better for safety and mobility) or corded (better for constant power). The best cordless circular saws come with brushless motors to optimise battery power and maximise the saw’s longevity.

It’s important to consider the blade diameter – larger blades cut deeper at 90°and 45°. If you are planning complex cuts don’t forget to check the bevel capacity (in degrees) too.

And for those longer jobs remember to factor in the weight of the circular saw. Cordless circular saws with larger capacity batteries weigh more.

I’ve collected the best circular saws to suit all budgets and compared all their features below. So, let’s take a look…

See the best Circular Saws below

Compare Circular Saws Here

Use the dropdown to sort the table by the feature that's most important to you.

  • Our score
  • Best For
  • Power
  • No-Load Speed
  • Blade Diameter
  • Blades Supplied
  • Cut Depth @ 90°
  • Cut Depth @ 45°
  • Bevel Capacity
  • Weight

Back To Contents

Read Our Circular Saw Reviews

B00WW83F4Q
0088381683234,0604310258283,0088381683197
Best cordless circular saw
Makita DHS680Z Cordless Circular Saw
Top Pick

Best cordless circular saw

  • Where to buy
  • Our Scoring
    Design
    Performance
    Power
    Noise
    Safety
    Value for Money
    Overall
    6 4
  • Power
    Battery - 18V
  • No-Load Speed
    3,700rpm
  • Blade Diameter
    184mm
  • Blades Supplied
    1 X 24 TCT
  • Cut Depth @ 90°
    57mm
  • Cut Depth @ 45°
    41mm
  • Bevel Capacity
    50°
  • Weight
    3.3kg
  • Our Review

    Makita-DHS680Z-18V-Brushless-Circular-Saw-performance

    If you’re keen to do away with cables and want a circular saw that’s relatively lightweight, this Makita DHS680Z ticks both of those boxes. It does pretty much everything you need it to and it’s an exciting and capable little saw.

    I tested it out on constructional timber and made loads of cuts at both 0 and 45° bevels. I then tried cutting some hard English oak and used the included rip fence to cut along some softwood boards. On all accounts, it was an absolute joy to use. Even though this saw is incredibly light, the electronic speed control means you always have enough power to cut through what’s in front of you.

    It might not have the biggest maximum cut depth at 57 mm, but you can extend the bevel to 50° and still tackle 37 mm thick timber. The powerful brushless motor spins the excellent Efficut 165 mm blade at a whopping 5,000 rpm, taking no time to get up to speed. The electronic brake stops it dead just as quickly when necessary.

    Overall, this is a blindingly good saw; it punches way above its weight in terms of power. Plus, because it’s light, you can hang it off a rafter with the clever sky hook. Overall, it leaves an incredibly good finish on hard woods and I think this is hands down the best cordless circular saw on the market today.

    Pros

    • Comparable power and performance with a corded circular saw but no wires to get tangled in
    • The cast magnesium body is lighter than aluminium but just as strong, making it much easier to handle without compromising on sturdiness
    • Automatic Speed Control automatically changes the cutting speed depending on the hardness of the material you’re cutting
    • The rafter hook attached to the body is useful for storage as well as attaching to a tool belt
    • Can cut up to a 50° angle

    Cons

    • The 57 mm cut depth gives you less range than most corded versions - every millimetre counts and more can make the job easier
    • It’s expensive for a circular saw - unless cordless is an absolute priority, for most home DIYers it’s a bit excessive.
    • Can't expect to run this circular saw all day on a single battery (even a heavy 6.0 Ah one) - the battery runs down quickly and requires charging often
    • The grip is a bit small if you’ve got large hands - Makita say it's easy to operate with a gloved hand, but in reality the clearance between the handle and body feels tight

Back To Contents

B00499DR8U
3165140477703,4011808084549
Best budget circular saw
Bosch PKS 55 Hand-Held Circular Saw

Best budget circular saw

  • Where to buy
  • Our Scoring
    Design
    Performance
    Power
    Noise
    Safety
    Value for Money
    Overall
    6 3.8333333333333
  • Power
    Mains - 1,200W
  • No-Load Speed
    5,600rpm
  • Blade Diameter
    160mm
  • Blades Supplied
    1 X 18 TCT
  • Cut Depth @ 90°
    55mm
  • Cut Depth @ 45°
    38mm
  • Bevel Capacity
    45°
  • Weight
    3.9kg
  • Our Review

    Anyone who’s ever dabbled with DIY tools will be familiar with the ‘Bosch’ name. Known for their innovative engineering and capable kit, there are two main lines of Bosch tools – green for DIY, and blue for professional use. The PKS 55 resides in their “green” line. It’s not a professional saw, but still one that every DIYer will find useful in their toolkit.

    When testing, I made the same series of cuts through softwood and hardwood as I did with the other saws – at both 0 and 45° bevels. Then I tried out the rip fence and took the ends off some big softwood boards.

    Like the name suggests, this circular saw can cut down to a depth of 55 mm. The 1,200 W motor spins the 160 mm Bosch Speedline wood blade at an impressive 5,600 rpm – these are all impressively good stats for a saw of this price.

    Although the finish wasn’t the best, and it took a bit more effort to push the saw through the wood, it’s incredibly good value for money. I’m also a huge fan of Bosch’s CutControl system- it makes freehand cuts a lot more accurate. As a result, this is probably the best budget circular saw on the market right now. Sure, it has its downfalls, but it also offers a lot for the price.

    Pros

    • Cuts well through both softwood and hardwood
    • Good value option when comparing cost and performance
    • Cutting depth of up to 55 mm is hard to find in quality tools in this price range
    • Relatively straight forward for people with limited DIY experience to get the hang of

    Cons

    • Aligning the cut line with the cutting guide can be difficult because the guide is sometimes hard to see
    • No dust box or dust-catching feature supplied
    • More effort required to push saw through wood than with others featured on this list

Back To Contents

B012CKRAYY
0604310259488,0088381686129
Best corded circular saw
Makita HS7601J/2 Circular Saw

Best corded circular saw

  • Where to buy
  • Our Scoring
    Design
    Performance
    Power
    Noise
    Safety
    Value for Money
    Overall
    6 4.25
  • Power
    Mains - 1,200W
  • No-Load Speed
    5,200rpm
  • Blade Diameter
    190mm
  • Blades Supplied
    1 X 24 TCT
  • Cut Depth @ 90°
    66mm
  • Cut Depth @ 45°
    46mm
  • Bevel Capacity
    45°
  • Weight
    7.19kg
  • Our Review

    Makita-HS7601J-Hand-held-Circular-Saw-performance

    Makita’s HS7601J/2 Saw is a reliable workhorse favoured by professional tradespeople all over the UK. It doesn’t have tons of fancy features, and it’s not particularly light, but I still think it’s the most capable corded circular saw available right now.

    Just like a tradesperson would, I put this circular saw through its paces on a variety of different woods. I blasted through constructional timber, hard English oak and ripped through metres of thick softwood boards. This saw is unbeatable! Side by side against any of the other saws on this list, it cuts the smoothest and takes the least effort to do so.

    It’s not just a reliable and powerful saw though. It’s also the most capable, with a maximum cutting depth of 66 mm. The 1,200 Watt motor spins the 12-tooth MForce blade up to an extraordinary 5,200 rpm, which helps make the cuts so effortless.

    The only three things that count against this saw are that it’s corded, that you can’t make bevelled cuts over 45°, and that the safety switch isn’t double-sided. For a saw that’s used so much in the real world, these factors are a little disappointing – they make it just a touch harder to use.

    Also, at first, I thought this saw was a bit heavy. It is quite weighty, but this does seem to be because all the parts are high quality and made to last.

    If I was only reviewing corded tools, this would easily win as the best circular saw overall – but when compared against cordless models it does have the downside of tethering you to a power supply.

    It comes in one of Makita’s useful MAKPAC boxes, which makes it easy to store, and it glides through all sorts of timber with ease. Overall, it’s very easy to use and I think it’s the best corded circular saw you can buy right now. A real pleasure to use!

    Pros

    • Makita’s attention to detail and build quality are very high compared to other companies
    • The Makita MAKPAC storage system is a brilliant way to keep all your power tools safe and organised
    • The adjustable-cutting-depth lever is easy to use and accurate
    • Strong enough to saw through hard English oak
    • The 66 mm cutting capacity gets the most out of the 190 mm saw blade size

    Cons

    • It’s quite a lot more expensive than some of the other circular saws on this list
    • Safety switch isn't double sided which makes it a bit less user friendly
    • It's relatively heavy and can get tiring after time
    • The 2.4 m power cable is a bit short for a premium circular saw
    • It's not possible to make bevelled cuts over 45°

Back To Contents

B073FBXDYD
4892210184603,4892210150080
Best lightweight 18V circular saw
Ryobi R18CS7-0 ONE+ Cordless Brushless Circular Saw

Best lightweight 18V circular saw

  • Where to buy
  • Our Scoring
    Design
    Performance
    Power
    Noise
    Safety
    Value for Money
    Overall
    6 3.25
  • Power
    Battery - 18V
  • No-Load Speed
    3,700rpm
  • Blade Diameter
    184mm
  • Blades Supplied
    1 X 24 TCT
  • Cut Depth @ 90°
    60mm
  • Cut Depth @ 45°
    42mm
  • Bevel Capacity
    50°
  • Weight
    3.2kg
  • Our Review

    Ryobi-R18CS7-0-18V-ONE+™-Cordless-Circular-Saw-performance

    The big, yellow power tool brand Ryobi have carved themselves out a legion of devoted fans – and they’re converting more DIYers every day! With a handy 18 Volt battery system and one of the best grips in the business, this Ryobi R18CS7-0 is a well balanced and comfortable saw to use.

    Putting this saw to the test against some constructional timber and English oak, I tried to make the tests as real-world relevant as possible. Most commonly, cuts with a circular saw will be parallel, but I also tried out plenty at a 45° angle too. Using the included rip fence, I cut along the grain of some big boards as well.

    Even though this saw features a brushless motor, it seemed to struggle more than the other cordless saws when cutting. It worked well enough but wasn’t the overall best circular saw that I tried.

    Nevertheless, sporting a big 184 mm blade, it can cut all the way down to 60 mm, which is quite a feat for a battery-powered tool. The 18 V system allows the blade to rotate at 3,700 rpm, and if you splash out for some of Ryobi’s High Energy batteries it will put out some serious cutting power.

    There is another negative to mention though, and that’s the fact that it’s got far too many plastic parts for my liking – for this reason, I’m not sure if it’s made well enough to quite justify the price tag. It comes across as a decent saw let down by cheap parts.

    In its favour though, it is easy to manage and one of the best lightweight rotary saws – which possibly wouldn’t be the case if it had more parts made of metal not plastic.

    Pros

    • The Ryobi ONE+ battery system means you can use the same battery in your Ryobi lawn mower and cutting saw
    • Brushless motor means not having to worry about changing brushes
    • Not having a power cord makes a big difference - it feels safer and more versatile
    • The rotating dust port makes attaching a dust extraction system much easier and helps keep the hose out of the way during use.
    • Very light weight - weighs just 2.8 kg without the battery installed which is quite easy to handle

    Cons

    • The clear plastic blade guard is a weak point - it’s a vital safety feature but the plastic may break if you put the saw down too heavily
    • The blade cuts on the right hand side of the motor, which makes keeping an eye on the cut line much more difficult if you’re right handed
    • More expensive than the professional power tool brands like DeWalt and Makita yet you don’t see Ryobi power tools used on building sites

Back To Contents

B07HBF1YL4
0849713078087
Most features for the money
Evolution Power Tools R185CCS Circular Saw

Most features for the money

  • Where to buy
  • Our Scoring
    Design
    Performance
    Power
    Noise
    Safety
    Value for Money
    Overall
    6 3.5
  • Power
    Mains - 1,600W
  • No-Load Speed
    3,900rpm
  • Blade Diameter
    185mm
  • Blades Supplied
    1 X 20 TCT
  • Cut Depth @ 90°
    64mm
  • Cut Depth @ 45°
    40mm
  • Bevel Capacity
    60°
  • Weight
    4.3kg
  • Our Review

    Evolution-R185-CCS-Circular-Saw-performance

    Sheffield-based Evolution power tools are a relatively new company when it comes to circular saws. Their budget-friendly saws and handy multi-material blades have gained them plenty of followers since they started back in 2002. Also, if you want to cut through more than just wood without changing blades, this is an option to consider.

    The Evolution R185 CCS is rated to cut through wood, steel, aluminium, plastics, and other materials. However, I mainly tested it against timber: from CLS constructional timber, to English oak that I milled myself, this big saw chewed its way through crosscuts and a few rip cuts too.

    It’s got a massive 1,600 Watt motor and a huge 185 mm blade that spins round at 3,900 rpm. In general, nothing about this saw is subtle – it’s heavy, it’s noisy and it’s not the easiest to manoeuvre. It cuts through most things you put in front of it, but it takes its time and doesn’t leave a particularly good finish.

    I suspect the main problem with this saw is that it’s trying to be a jack of all trades and ends up being a master of none. You’d think that such a big motor would sing through oak, but it’s slow.

    Overall, I’d say that it’s not a bad saw for the money, but it’s pretty rough around the edges. Because it’s intended for more than just wood, it’s one of the best circular saws if you’re after a lot of features at this price point, but it has its flaws as a standard saw.

    Pros

    • Multi-material circular saw - intended to cut through wood, metal and plastic without changing the blade
    • The footplate is oversized, making the saw easy to keep in a straight line
    • 3 metre power cord is quite a reasonable and useful length
    • The cuts that it makes are relatively clean and smooth
    • Extra handle helps have a bit more control over the weight of the saw

    Cons

    • Heavy duty and potentially difficult to handle - at just under 5 kg it’s not the sort of thing you want to take up a ladder with you
    • The large motor on the left hand side can get it the way- you need to leave plenty of clearance when working with squeeze clamps which isn’t always ideal.
    • The range of aftermarket circular saw blades available in 20 mm bore size is quite limited
    • There’s no bag or case, nor much included in the way of accessories

Back To Contents

B006XBSXAE
5035048356210,0604310243982,5053959177717
Best compact 18V without brushless motor
DeWalt DCS391N-XJ Cordless Circular Saw

Best compact 18V without brushless motor

  • Where to buy
  • Our Scoring
    Design
    Performance
    Power
    Noise
    Safety
    Value for Money
    Overall
    6 4
  • Power
    Battery - 18V
  • No-Load Speed
    5,150rpm
  • Blade Diameter
    165mm
  • Blades Supplied
    1 X 24 TCT
  • Cut Depth @ 90°
    55mm
  • Cut Depth @ 45°
    42mm
  • Bevel Capacity
    50°
  • Weight
    3.2kg
  • Our Review

    DeWalt-DCS391N-XJ-XR-Cordless-Circular-Saw-power

    One of the most respected big tool brands, DeWalt are known for their good saws. There was a lot riding on this little beast, and I was blown away by how well it coped with all sorts of jobs. The DCS391 is another excellent bit of kit in DeWalt’s range of cordless tools.

    I put it to work cutting plenty of CLS, just as any DIYer or professional would, making lots of cuts at 0° and more than a few at 45° as well. I tried the same on some hardwood and then made some difficult long rip cuts as well. I have to say, there’s one thing that this saw does well and that’s make smooth cuts. It felt like it had power in spades, and I always had complete control.

    Although this saw only has a brushed motor, it’s still very capable. The maximum cut depth of 55 mm could have been a bit more, but you can still increase the bevel to 50° when you need it. The included DT1209 blade didn’t make for the cleanest cutting, but it was very sharp and excelled at rip cuts.

    This might have been the best circular saw that I tried, if it wasn’t for the odd position of the dust extractor hose and some hard-to-read angle markings. I’m splitting hairs though really because it’s still one of the best cordless ripping saws I’ve ever tried, plus it’s compact to boot.

    Pros

    • Low noise and vibration levels make it comfortable to use for long periods
    • The rubberised grip and front handle are very comfortable and it easier to manage awkward cuts too
    • The cast magnesium base and blade housing are lightweight, rigid, and rust-proof - the overall feel is long-lasting quality
    • The electronic brake makes this one of the safest circular saws you can buy- the blade stops almost immediately when you release the trigger which avoids potentially dangerous overruns
    • The included 24-tooth carbide tipped blade is surprisingly good and leaves a nice thin kerf

    Cons

    • Some users have had problems with the safety switch during use - it’s quite easy to slip off the switch and lose power during a cut
    • No case, battery, or charger come included - this is just the bare unit
    • With a cutting capacity of only 55 mm, there’s quite a lot you can’t do with this circular saw unless you cut from both sides

Back To Contents

Circular Saws Price Comparison

Every day DIY Garden scans thousands of products to help you find the cheapest prices. Not only do we want to help you find the best products through our in-depth testing, but we also want to help you find the best places to buy them too. We’re working hard to expand our network of retailers, and will be continually adding in new options.

The Cheapest Circular Saw Prices Found Today

Back To Contents

How to Choose The Best Circular Saw

Circular saws make a whole range of cutting jobs so much easier. They’re especially useful for rip cutting (cutting a long length of wood along the grain) but are also great for cutting logs to make firewood, crosscutting, and creating bevels. Some people opt to use a circular saw for jobs when using a handsaw might get too tiring.

When buying a circular saw, there are a few points to bear in mind. Working out which design features are most important to you can help ensure you get the best circular saw for the job.

The Benefits of Owning a Circular Saw

Cutting timber with a handsaw is slow, tiring and hard to do well. If you want to avoid waving cut lines and a sore hand, a circular saw is the answer. Here are some of the main benefits of using a circular saw:

  • Generally, circular saws are not overly complicated to use and you don’t need to be an expert DIYer to get the hang of using one. With a bit of practice and a little know-how, you’ll be able to start cutting through wood.
  • Some circular saws can cut through more than just wood. You’ll be able to find saws that can cut through hardwood, plastic and even mild steel without even changing the blade.
  • They are portable tools so if you don’t have any space on your workshop table, you can use a circular saw in the garden or on the driveway.
  • It’s possible to make straight, freehand cuts with a circular saw (although you’ll still need to use some form of guide).

If you think a full-size circular saw is too big for the job, or you need to get into tighter spaces, take a look at my guide to the best mini circular saws. They’re one of the handiest tools you’ve probably not thought about adding to your tool kit.

Different Design Features

Corded or Battery Powered?

The quality and reliability of battery powered tools have come a long way in the last few years. As battery life has improved, more and more professionals and savvy DIYers have switched to cordless circular saws, drills, and even table saws. They’re convenient, incredibly portable and you can use them just about anywhere, as long as your batteries are charged up.

But if you’re the sort of person who wants to know that your power tool is ready to go at the flick of a switch, or you don’t need to work off-site, then corded saws are the way to go. Corded circular saws are generally less expensive and offer more power than battery-powered tools. It’s all about how you plan to use your circular saw.

Base Plate Material

The base plate is the rectangular base of the saw. It sits on top of the surface you are cutting.

Most budget/mid-range circular saws have an aluminium base plate. These are sturdy enough for the job, and help make the machine more lightweight. However, they are not as strong as a magnesium alloy base, which is frequently used for upper-end machines.

If you intend to use your circular saw a lot, and not just for occasional use, a magnesium alloy base will be more hardwearing. However, these saws are generally more expensive than a circular saw with an aluminium base.

Making Bevel Cuts

Whilst most circular saws can make bevel cuts, the angles that they can achieve may vary. For making either bevel or mitre cuts, a cutting angle of 45° will be commonly required. The majority of circular cutting saws can achieve a 45° angle, but it’s worth checking before buying the machine just in case.

Choosing the Right Blade

Circular cutting saws can be equipped with different blades depending on what they’ll be used for.

Generally speaking, when cutting wood, a blade with around 24 teeth will be sufficient for most jobs.

Occasionally, when cross cutting or cutting plywood, the blade may start to splinter or create very rough edges. In these instances, using a finer blade with more teeth may come in handy. There are blades that are specifically intended for cutting plywood or cross-cutting; they have many smaller teeth – up to 140.

Before buying a different blade,  or changing the blade over, always check with the saw’s user manual to make sure you are doing everything according to the manufacturer’s recommendation.

Back To Contents

Circular Saw FAQs

What’s the ideal cutting depth for a circular saw?

A circular saw with a maximum cutting depth of around 6 cm should be optimal for most jobs. This is generally sufficient to get through most pieces of wood. You can adjust the cutting depth before sawing to make sure that it is properly configured for the wood you are sawing.

How do I change my circular saw blade?

Check your user manual for the precise steps, but the common way to change a circular saw blade is as follows:

  1. Always start by making sure that your saw is unplugged/the battery is removed.
  2. Press and hold the spindle lock to stop the blade from spinning and use the included Allen key to undo the nut that holds the blade on.
  3. Swap the blade out and replace the nut once the new blade is in place. Make sure that the blade has been put in the right way round.
  4. Ensure the blade is securely tightened to stop it from slipping.

What type of circular saw blades are available?

One of the best ways to get the most out of your circular saw is to choose the correct blade for the job. Most blades are tungsten carbide tipped (TCT) and usually, the higher the number of teeth, the finer the cut it makes. Multi-material blades are available if you need to cut through plastics, metals and other materials besides timber.

Do I need any accessories for my circular saw?

A roofing square or speed square can come in handy if cutting angles. This is a simple metal triangle with a stop on one end; you can hold it on a piece of timber as a guide and guarantee a 90° or 45° cut every time. A decent set of clamps can also be useful to have.

Do I need to wear any special safety gear when using a circular saw?

You should always wear the correct personal protective equipment whenever operating power tools. Even though most circular saws have basic safety features such as a blade guard, and are relatively quiet, you should wear appropriate ear and eye protection. A dust mask can also protect from inhaling wood dust.

Back To Contents

How useful was this post?

Click on a star to rate it!

Average rating 5 / 5. Vote count: 7

No votes so far! Be the first to rate this post.

As you found this post useful...

Follow us on social media!

Related Articles
Scroll to Top